Dissolution test result

[sharmin_akter]

Dear All,
Good day.
please help me in following issue.

During writing dissolution test result in Analytical raw data/ protocol, how should it is to be written?

for example. Specification is : Not less than 70%.
the results of six tablets are: 90, 85, 80, 92, 94, 98.

So in result tablet, we usually put minimum to maximum, like: (80 ~ 98).
is it ok to write like this?
or it should be written of individual result, like: ( 90, 85, 80, 92, 94, 98).

which should be followed.

please help with reference.

thank you in advance.

[sunilrbudhkar]

You can write the dissolution results according to the dissolution basket ID numbers. And not as minimum to maximum.

[sharmin_akter]

thank you SIr.

could you share any reference please.

[Abdussobhan (Abdus Sobhan Salim)]

You should write the dissolution results as follows:
At first, write serially 6 dissolution results and finally write the average result among 6

1. Dissolution = 90 %
2. Dissolution = 85 %
3. Dissolution = 80 %
4. Dissolution = 92 %
5. Dissolution = 94 %
6. Dissolution = 98 %

Average Dissolution: 89.83%

Thanks.
if you need many more please contact

[sharmin_akter]

thank you so much for your feedback.