If plant is under shutdown then is it required to do component calibration and pm of equipment as per their schedule ?
No, but do it complete before restart of the plant.
Please suggest me which website is suitable for calibration of all pharmaceutical instruments
Please go through the page
EURAMET has published calibration guidelines to improve harmonisation in the calibration of measuring instruments.
All guidelines are listed below according to their technical area and are available for download as PDF version.
A list of previous versions of the calibration guidelines and the differences between the versions can be found here
Get notified about updates of EURAMET Calibration Guidelines
To receive information about updates of EURAMET Calibration Guidelines please subscribe >>
Electricity and Magnetism
Mass and Related Quantities
Metrology in Chemisty
TC-MC has not developed Calibration Guides. Several guidance documents have been published by Eurachem. They can be downloaded from the Eurachem website under: https://www.eurachem.org/index.php/publications/guides
No. 1 | Calibration of Stylus Instruments for Measuring Surface Roughness | TC-L
The Guide is no longer available. TC-L recommends the use of DKD-R 4.
No. 5 | Coordinate Measuring Machine Calibration | TC-L
The Guide is no longer available. Superseded by ISO 10360 series: Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM).
No. 9 | Measurement and Generation of Small AC Voltages with Inductive Voltage Divider | TC-EM
The Guide has been withdrawn since it was outdated and no longer used.
The calibration guides were originally published by EAL Committee 2 (Calibration and Testing activities). They have been revised and re-published by the corresponding EURAMET Technical Committees (TC). The copyright of all guides is held by © EURAMET e.V. 2007.
Conditions for the translation of EURAMET documents
Documents for download: